Upper Parts Kit

2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500

2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500

2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500
PLEASE USE COMPATIBILITY GUIDE ABOVE TO ENSURE FITMENT BEFORE PURCHASING. Manufactured by OEM-approved and ISO-certified manufacturers, using high-quality materials to directly replace the original car equipment, 100% factory tested to ensure quality and durability. WWM Control Arm have reasonable price and excellent quality. If you are looking for high quality control arm replacement products.

WWM will provide you with the best quality control arm at a very affordable price. Fully compatible as a replacement for factory parts. There's no need for any modifications, they drop right into the factory location.

Before placing the order, please check your car model in the Compatibility table. We try to provide quality products and service to our customers. With nothing to worry about, try it today! It is designed for 2-4 lift.

The ball joint can be replaced, but a Hydraulic tools is required. Grease has been added to the product in the production process, and the grease is injected with hydraulic tools, so the ball joint could not fill any grease. 1 pair right and left kit. Do I need to replace the control arm if the bushings are worn?

Because the weight of the car. Is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself.

When one control arm is worn it is highly advised to replace the opposing arm. What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car.

What happens if I don't replace ball joints? If you don't want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension.

However, you do not need to change the ball joints if it is new. Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints.

At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation.

Why should I get my tie rods inspected on a regular basis? If you don't get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it's possible that bad tie rods may be the culprit. Your vehicle's tires will also show uneven wear on the inside and outside edge of the tire when there's a tire rod issue.

However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning.

This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents.

Take your car into a mechanic if you experience this tie rod symptom. If your tie rods continue to go unchecked or unfixed, the rods can completely break.

This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may "wander" as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident.

If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. What happens when a sway bar breaks? Because a sway bar helps the car's suspension to put more pressure on loaded springs, a broken sway bar means that the car's suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. (Excluding contrived damagement or misusage). We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem. We highly value and appreciate your business. We will reply you within 12 hours, except on Weekends and Holidays. 4Solve any problems with you in friendly way after communication. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Control Arms, Ball Joints & Assemblies". The seller is "wellwellmodel" and is located in this country: US.

This item can be shipped to United States.

  • Other Part Number: for 4X2 4X4 2WD 4WD; Comes W/ Ball-Joint
  • Qauntity: Pack of 2
  • Fitment Type: Performance/Custom
  • Color: Blue (as pictures show)
  • Control Arm Type: Front Upper Control Arms
  • Adjustable: Yes
  • Suspension Grade: Heavy Duty
  • Placement on Vehicle: Left, Right, Front, Upper
  • Brand: WWM
  • Type: Suspension Parts
  • Interchange Part Number: for GMC Sierra for Chevy Silverado 1500 2007-2017
  • Included Hardware: Bushing
  • Style: Tubular


2-4''Lift Front Upper Control Arms KIT For 2007-2015 Chevy Silverado 1500