Upper Parts Kit

Front Upper Control Arm For Lift Up 3 Suit Nissan D40 4WD 05-14 Frontier Navara

Front Upper Control Arm For Lift Up 3 Suit Nissan D40 4WD 05-14 Frontier Navara
Front Upper Control Arm For Lift Up 3 Suit Nissan D40 4WD 05-14 Frontier Navara
Front Upper Control Arm For Lift Up 3 Suit Nissan D40 4WD 05-14 Frontier Navara
Front Upper Control Arm For Lift Up 3 Suit Nissan D40 4WD 05-14 Frontier Navara
Front Upper Control Arm For Lift Up 3 Suit Nissan D40 4WD 05-14 Frontier Navara

Front Upper Control Arm For Lift Up 3 Suit Nissan D40 4WD 05-14 Frontier Navara

Adjustable Front Upper Control Arm For Lift Up 3 Suit D40 Thai 4WD 2005-14. While minor adjustments can usually be done with the lower camber bolts, bigger lifts will need a lot more!

Another problem many find is that once a longer travel shock or a spring package that allows increased travel is fitted, the upper control arms may contact the chassis or the spring itself. A steeper angle on the upper control arm moves the steering knuckle inboard and increases the angularity on the ball joints, sometimes maxing out their movement. With a raised suspension height, the 3rd Party upper ball-joint is forced to operate at an extreme angle and wider tires may not clear the factory upper control arms. An over-stressed 3rd Party ball-joint also has the potential to separate or break, leading to catastrophic failure of suspension, steering, and CV axle. The preferable solution is to replace the factory arm with a newly designed upper arm, which allows greater clearance for the thicker or heavier aftermarket coils generally required to lift the vehicle.

These Upper Control Arm featuring with ball joint and high-quality bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. Cast steel designs provide the strength and durability needed for the most demanding environments. This arm provides 2 degree of positive caster change over the stock control arm with the ball joint in the 0 position. This means the range of caster adjustment will be 0 degree to 4 degree of additional positive caster.

Not Including Installation Guide or Manual. This part should only be installed by personnel who have the necessary skill, training and tools to do the job correctly and safely. Incorrect installation can result in personal injury, vehicle damage and / or loss of vehicle control.

Only Fits For 4WD & LIFT UP 3 VEHICLE MODEL - Does Not Fit For SPAIN-BUILT MODEL (VIN Number start with VSK). Lift Up 3 & 4WD, Thai Built Model (VIN Start w/ MNT). Lift Up 3 & 4WD Model. 1 Pair (Left & Right) Front Upper Control Arm. Packing Size : 40 x 32 x 12 cm.

Packing Weight : 7.5 kg. Your satisfaction is our priority and we are constantly improving our operations to provide the best service for you. We are handled your order with care and attention. All products will be checked thoroughly before posting. Should you notice you have bought the wrong item / size, please do not hesitate write to us or leave us message.

We are willing to make it right to you. Photos are advisable and preferable. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Control Arms, Ball Joints & Assemblies".

The seller is "jdm-motorparts" and is located in this country: MY. This item can be shipped to United States, Mexico, Canada.

  • Type: Control Arm Kit
  • Placement on Vehicle: Front, Left, Right, Upper
  • Brand: Aftermarket Replacement Parts
  • Manufacturer Warranty: No


Front Upper Control Arm For Lift Up 3 Suit Nissan D40 4WD 05-14 Frontier Navara