Front Upper Control Arm Up 2 For Nissan Navara D40 NP300 Pickup Frontier

While minor adjustments can usually be done with the lower camber bolts, bigger lifts will need a lot more! Another problem many find is that once a longer travel shock or a spring package that allows increased travel is fitted, the upper control arms may contact the chassis or the spring itself. A steeper angle on the upper control arm moves the steering knuckle inboard and increases the angularity on the ball joints, sometimes maxing out their movement.

With a raised suspension height, the 3rd Party upper ball-joint is forced to operate at an extreme angle and wider tires may not clear the factory upper control arms. An over-stressed 3rd Party ball-joint also has the potential to separate or break, leading to catastrophic failure of suspension, steering, and CV axle.

The preferable solution is to replace the factory arm with a newly designed upper arm, which allows greater clearance for the thicker or heavier aftermarket coils generally required to lift the vehicle. These Upper Control Arm featuring with ball joint and high-quality bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. Cast steel designs provide the strength and durability needed for the most demanding environments.

Design to correct alignment angles. Not Including Installation Guide or Manual.

Only Fits For 4WD & LIFT UP 2 VEHICLE MODEL. When install these control arm, please Jack-Up your car's knuckle to make the control arm balance before lock the bushing. As it will extend the life span of the bushing. If you did not balance the control arm before lock the bushing, after installation the bushing will twisted and it will reduce the life span of the bushing.

You might need to change your rims to fit this item. Does not fits for SPAIN BUILT MODEL (VIN start with VSK).

This part doesn't fits with original rims. Applications (Fits For Below Vehicles). Most of the images provided are for illustration purposes only and may not be the actual products. 1 Pair (Left & Right) Front Upper Control Arm. Packing Size : 44 x 37 x 15 cm.

Actual Weight : 7.6 kg. Your satisfaction is our priority and we are constantly improving our operations to provide the best service for you. We are handled your order with care and attention.

All products will be checked thoroughly before posting. Should you notice you have bought the wrong item / size, please do not hesitate write to us or leave us message. We are willing to make it right to you. Photos are advisable and preferable.

---